K&H LARGE HEATER - 11" X 24" 

With multiple size Pet Bed Warmers available, it's now possible to add heat to most indoor pet beds.  It slides into any zippered dog or cat bed and is recommended for beds with at least ½ inch of padding between the warmer and bed surface.  Simply plug it in and the warmer will generate a subtle, comfortable heat that any pet is sure to enjoy.

Please Note: This is a Pet Bed Warmer, it should only be used inside of a pet's bed and should never come in direct contact with your pet.

Thermostatically Controlled Temperature

Internal thermostats automatically adjust the Pet Bed Warmer's temperature as needed to create a comfortable resting area for dogs and cats.  They're pre-set to heat to your pet's natural 102°F body temperature when he/she lies on the pad.  When plugged in but not in use, the Pet Bed Warmer will maintain a temperature 10-15°F greater than the ambient room temperature.

The Pet Bed Warmer is the essence of simplicity and has no on/off switch to monitor.  Plug it in and the product will begin to warm automatically.  Its soothing, gentle heat will not exceed the natural body temperature of a dog or cat, allowing your pet to enjoy hours of warmth.

Multiple Size Options

We've expanded the Pet Bed Warmer lineup to accommodate the needs of dogs and cats of all sizes.  Now you can select the size that fits your pet's bed most closely.

• Small – 8.5" x 9”
• Large – 11" x 23.75"

Low Power Consumption

Our product engineers have worked tirelessly to minimize the power consumption of our best-selling Pet Bed Warmers while maximizing their heat output efficiency. Every size Pet Bed Warmer uses less energy than most light bulbs, helping keep your electrical bills low.

Safety-Tested

The K&H Lectro-Soft has been tested rigorously and certified by MET Labs.  Their certification means this product adheres to strict electrical safety standards.

Cleaning Instructions

Unplug and remove the Pet Bed Warmer from any pet bed prior to washing the bed.

DO NOT place this item in the washing machine.  It should be wiped clean with a damp cloth.

Testing Your Pet Bed Warmer

You can test the Pet Bed Warmer by inserting the warmer in a pet bed and placing a large pillow on top of the bed.  After about 20 minutes, feel under the pillow.  It will feel warm, not hot. DO NOT use an extension cord during this test.

The surface of the bed will be about 15°F above ambient air temperature until the pet lies on the bed.  Then it will warm to about 102°F, which is the natural body temperature of dogs and cats.

SHIPPING: FOB - DES MOINES, IA